Points/Stats Schedules







Competition
National Events
Regional/Division Events
Heritage Series
Member Track Directory
Division Offices
SRAC Advisor
Competition Number/License Applications & Forms
NHRA Approved ASO's
Insurance Claim Information
Tech
Automatic Horsepower Factoring System
AHFS Request
Engine Blueprint Specifications
Indexes and Records
NHRA Accepted Products
Rules
Stock Car Classification
Tech Support Contacts
Chassis Inspector
Contingency
Contingency Award Rules & Policies
Sponsor Listing & Contact Information
Contingency Sponsor Requirements
LODRS Div Contingency Sheet
Camping World Series Event Contingency Posting
Contingency Sponsor Approved Decals
W9 Form

NHRA Releases Constant Aviation NHRA Factory Stock Showdown Rule Amendments

Changes are highlighted below in yellow.

SECTION 11B: NHRA FACTORY STOCK SHOWDOWN, DESIGNATIONS (Page 13)

DESIGNATIONS

Designation: FSS

 

Reserved for 2008 and newer Chevrolet COPO, Dodge Drag Pak, and Ford Cobra Jet with the following factory production engine of the same make. Year of engine optional. Only those engines and/or bodies listed in this section are eligible for the Factory Stock Showdown.

 

Minimum weight for all pre-2019 Chevrolet COPO and Ford Cobra Jet combinations 3,450 lbs. except for all Ford Cobra Jet combinations with 2.3L Eaton superchargers 3,275 lbs.

 

Minimum weight for the 2015 Drag Pak combination 3,500 lbs.

 

Minimum weight for all 2019 and 2020 Chevrolet COPO, 2021 Drag Pak and 2019 Ford Cobra Jet combinations 3,575 lbs.

 

Maximum weight on all combinations 3,600 lbs.

 

Note: NHRA may make adjustments to (minimum weights, supercharger pulley ratios, etc.) at any time to control performance and maintain parity within the category.

 

Permitted Combinations:

All previously approved Factory Stock Showdown bodies are eligible to be used with the approved engine combinations listed below. Engine must be same make as body.

 

2017-2018 Camaro COPO 350

  • 590 HP Supercharged 2.9L Whipple

2019 Camaro COPO 350

  • 630 HP Supercharged 2.65L Magnuson
  • Upper supercharger pulley size: (3.250) (3.125) inches
  • Supercharger rear jack shaft cog pulley 32 teeth
  • Supercharger rear cog pulley 34 teeth

2020 Camaro COPO 350

  • 630 HP Supercharged 2.65L Magnuson
  • Upper supercharger pulley size (3.250) (3.125) inches
  • Supercharger rear jack shaft cog pulley 32 teeth
  • Supercharger rear cog pulley 34 teeth

2015 Challenger Drag Pak 354

  • 540 HP Supercharged 2.9L Whipple
    • Upper supercharger pulley size: (3.000) inches

2021 Challenger Drag Pak 354

  • 630 HP Supercharged 3.0L Whipple
    • Upper supercharger pulley size (3.500) (3.375) inches
    • Lower engine pulley (7.530) (8.000) inches

2010 Mustang Cobra Jet 330

  • 435 HP Supercharged 2.3L Eaton

2012 Mustang Cobra Jet 330

  • 450 HP Supercharged 2.3L Eaton

2016 Mustang Cobra Jet 302

  • 575 HP Supercharged 2.9L Whipple

2019 Mustang Cobra Jet 327

  • 610 HP Supercharged 3.0L Whipple
    • Upper supercharger pulley size: (3.750) (3.625) inches
    • Lower engine pulley 6.938 inches

2019 Mustang Cobra Jet 351

  • 570 HP Supercharged 2.9L Whipple
    • Upper supercharger pulley size: (3.500) inches






RM